Adhesive Sealants

Product Details:

• Installing and grouting decorative finishes in environments with an high aesthetic value (e.g. showrooms, commercial environments, etc.)
• Suitable for application on substrates where a semi-transparent finish is required, it also allows the light to filter through (e.g. glass substrates)
• Installing and grouting floors and walls in showers and bathrooms. Suitable on fibreglass and PVC substrates.

Product Details:

• grouting tiles with 1-4 mm joints;
• grouting glass mosaic, including in swimming pools and on façades
• grouting interior and exterior floors with every type of tiles.

• Keracolor SF is an unsanded cementitious grout with special fine-fillers, synthetic resins and water-repelling additives.
• Keracolor SF grouts also contain colouring pigments that are unaffected by light.
• Keracolor SF is specially formulated not to damage the surface of tiles with soft glaze and the surface of marble during the application.
• Mixed with water, Keracolor SF becomes an easily trowellable grouting mortar for tiles and can be cleaned off very easily.

Product Details:

• Keracolor FF is a blend of cement, very fine-graded aggregates, special polymers, additives and pigments. The use of special hydrophobic additives (DropEffect ® technology) gives grouting mortars highly water- repellent properties, making them less prone to dirtiness and with excellent durability. The following features are obtained when mixed with the right water ratio and used correctly
• water-repellent and droplet-effect
• good compressive and flexural strength, good resistance to freeze/thaw cycles, and therefore good durability
• a smooth final surface with low water absorption, therefore easy to clean
• very good abrasion resistance
• low shrinkage, therefore absence of cracks and fissures