Mapei Planicrete SP Floor Coating

Product Details:

Where to Use: For the preparation of high performance mortar, screeds and renders.

Some Application Examples:

Screeds and levelling compounds withhigh-resistance f or interior and exterior use.

Cement renders for interior and exterior.

Cement slurry with high adhesion for bonding newscreeds on to existing screeds and concrete.

Cement-mortar adhesive for exterior and interiorbonding of ceramic tiles on walls and floors.

Modifying cement mortars that have to be applied in thin layers.

Technical Characterisitics: Planicrete SP is a greenish white, multipurpose synthetic-rubber latex to be mixed before use with Portland cement and aggregate (having correct granulometry) to obtain mortars with extremely high bonding strength. After setting, such mortars show mechanical resistance to shocks and vibrations, resistance to water-absorption, point load, freeze-thaw cycles, temperature changes, aging and to diluted chemical agents.

Recommendations:

Do not use Planicrete SP on walls and floor ssubject to extreme flexing or vibrations (woodboard, chipboard, a sbestos board and wood agglomerates etc.) for bonding tiles. Use Kerabond Isolastic, Adesilex P22 or Keralastic.

Do not use Planicrete SP a s a waterproofmembrane (use Mapelastic or Aquaflex).

Do not use Planicrete SP n eat as a slurry:always mix with Portland cement.

Do not apply renders and screeds to the Planicrete SP s lurry or previous screeds after they have completely dried (in order to avoid debonding).

Do not mix Planicrete SP with hydrated orhydraulic lime.

Do not use as strong chemical resistant mortar.May be used for substrate preparation and levelling, but once cured and dried, it must be covered with Kerapoxy mortar and grout or Mapecoat I 24.

Do not use Planicrete SP if the ambient temperature is lower than +5 °C or higher than +35 °C during application. Multipurpose latex additive for mortar and cementitious adhesive.