Product Details:
Minimum Order Quantity | 25 Bag |
Model Number | Keraflex Maxi S1 |
Packaging Type | Bag |
Form | Powder |
Color | White |
Open Time | Greater than 30 min |
Pack Size | 25 kg |
Brand Name | Mapei |
Bulk Density | 1250 kg/m2 +-(100) |
Dry Solid Content | 100% |
Density to Mix | 1500 kg/m2 +-(100) |
pH of Mix | Over 12 |
Pot Life | Over 8 hrs |
Adjustability Time | 45 min |
Instruction for Use:
Substrate Preparation: Substrates must be flat, free of loose particles, clean and suficiently dry. Gypsum substrates andanhydrite screeds must be perfectly dry and treated with Primer G, Primer S or Eco Prim T Plus.
Preparing The Mix: Pour 25kg bag of Adesilex P10 into a bucket containing 7.25-8L of clean water and mix until a lump free homogeneous paste is obtained, allow to stand for 5 minutes, remix and the paste is ready for application. The resultant paste of Keraflex Maxi S1 remains workable for about 8 hours.
Applying the mix: Apply Keraflex Maxi S1 with a notched trowel in the proper quantity to obtain an optimal wetting of the back of the tile.
Curing Time: Set to ligh foot traffice floors are set to light foot traffice after approx 24 hours. Ready to use: floors are ready for used after approx 14days. Basins and swimming pools can be filled after 21 days.
Consumption:1.2kg/m2
NB: Use the product in temperature between +5 to +40 degree C
Storage: 12 months in the origional unopened packaging in a dry and ventilated place. Protect From Humidity
Further Information: For further information refer to the tehnical data sheet. Safety data sheet available for professional user on request. Product for Professional use.
High Peformance Cementitious Adhesive, Deformable for Ceramic Tiles And Stone Material:
Improved adhesion
No vertical slip
Extended open time
Low-Dust technology (considerable dust decrease during mixing)
Especially suitable for the installation of large size porcelain tiles.
Product Details:
Minimum Order Quantity | 100 Bag |
Model Number | P10 |
Packaging Type | Bag |
Form | Powder |
Color | White |
Brand Name | Mapei |
Bulk Density | 1300 kg/m3 |
Dry Solid Content | 100% |
Density of the Mix | 1500 kg/m3 |
pH of Mix | 13 |
Pot Life | Approx 8 hrs |
Pack Size | 25 kg |
Ready for Grouting on Floors | After 24 hrs |
Set to Light Foot Traffice | 24 hrs |
Ready for Use | 14 days |
Detail:
High Performance White
Cementitious Adhesive with no vertical slip and extended
Open time for glass and marble mosaics,ceramic and vitrified mosaics and tiles
Walls and floors
Internal and External
Instruction for Use:
Substrate Preparation: Substrates must be flat, free of loose particles, clean and suficiently dry. Gypsum substrates andanhydrite screeds must be perfectly dry and treated with Primer G, Primer S or Eco Prim T Plus.
Preparing The Mix: Pour 25kg bag of Adesilex P10 into a bucket containing 8.25-9L of clean water and mix until a lump free homogeneous paste is obtained, allow to stand for 5 minutes, remix and the paste is ready for application. The resultant paste of Adesilex P10 remains workable for about 8 hours.
Applying the mix: Apply Adesilex P10 with a notched trowel in the proper quantity to obtain an optimal wetting of the back of the tile.
Adjustable Time: Approx 30 min
Open Time: >30 minutes
Curing Time: Set to ligh foot traffice floors are set to light foot traffice after approx 24 hours. Ready to use: floors are ready for used after approx 14days. Basins and swimming pools can be filled after 21 days.
Consumption:2.5kg/m2
NB: Use the product in temperature between +5 to +40 degree C
Storage: 12 months in the origional unopened packaging in a dry and ventilated place. Protect From Humidity
Further Information: For further information refer to the tehnical data sheet. Safety data sheet available for professional user on request. Product for Professional use.
Product Details:
Minimum Order Quantity | 100 Kg |
Model Number | Isolastic |
Packaging Type | HDPE Barrel |
Form | Powder |
Color | Pinkish White |
Density | 1.03 g/cm3 |
Dry Solid Content | 35% |
pH | Over 12 |
Pot Life | 8 hrs |
Brand Name | Mapei |
Pack Size | 8 kg |
Technical Characteristics: Isolastic is a very fluid, pinkish-white liquid composed of a water dispersion of an extremely elastic polymer, which, when mixed with cement based adhesives, improves adhesion to all substrates, deformability and impermeability, once hydration has taken place.
Recommendations: Kerabond, Kerabond T, Kerafloor or Adesilex P10 mixed with Isolastic must never be used for:
Installing stone slabs subject to moisture movement
Iinstalling marble or natural stone subject to efflorescence or staining from moisture
Installing tiles in reservoirs, swimming pools or refrigeration rooms that need to be put into service quickly
Installing on metal, rubber, PVC, and linoleum surfaces
At temperatures lower than +5°C or higher than +40°C.
In dry, hot climates, the open time of an adhesive made by mixing Isolastic into Kerabond, Kerabond T, Kerafloor or Adesilex P10 is shorter. A skin may form on the surface, which must then be removed and fresh adhesive applied.
Application Procedure: Preparing the substratesAll substrates receiving Kerabond, Kerabond T, Kerafloor or Adesilex P10 + Isolastic must be flat, mechanically strong, free from loose parts, grease, oil, paint, wax, etc. Precast concrete elements or in situ concrete must be cured for at least 3 months in favourable weather conditions. Cementitious substrates must not be subject to shrinkage once the tiles have been installed, therefore in warm weather renders should be cured at least one week per centimetre of thickness. Cementitious screeds must have an overrall cure of at least 28 days unless they have been made with the special MAPEI binders for screeds such as Mapecem, Mapecem Pronto, Topcem or Topcem Pronto. Surfaces that are too hot due to exposure to direct sunlight should be cooled by dampening them with water.
Gypsum substrates and anhydrite screeds must be perfectly dry (maximum residual moisture 0.5%), sufficiently hard and free from dust. They must always be treated with Primer Gor Eco Prim T. Areas subject to extreme damp must be primed with Primer S.
As a general rule, refer to the relative MAPEI technical documentation about substrate preparation before repairing cracks in substrates, consolidating rapid-drying screeds and levelling off installation surfaces.
Product Details:
Minimum Order Quantity | 50 Bag |
Packaging Size | 20 kg |
Brand | Mapei |
Model Number | Topcem |
Packaging Type | Bag |
Form | Powder |
Color | Grey |
Bulk Density | 850 kg/m3 |
Dry Solid Content | 100% |
Density of Mix | 2100 kg/m3 |
Working Time of Mix | 60 min |
Where to Use:
Formation of bonded, unbonded and floating screeds on both existing and new concrete prior to the installation of wood, PVC, linoleum, ceramic tiles, natural stone, carpet or any other flooring where rapid drying is required for short installation times
Suitable for indoor and outdoor use.
Some application examples:
Formation of screeds set to light foot traffic after 12 hours and completely dry after 4 days, for laying resilient flooring and 4 days for wooden flooring.
Formation of screeds on which ceramic tiles can be laid after 24 hours and natural stone after 2 days.
Patching and repairing floor screeds where rapid restoration is required.
Preparation of screeds incorporating underfloor heating systems without the need for polymer additives
Technical Characterisitics: Topcem is a special hydraulic binder which, when mixed with graded aggregates and water, can produce mortars that can harden in approximately 24 hours, and dry in approximately 4 days.
Recommendations:
Do not mix Topcem with other cement, lime, gypsum or Mapecem etc.
Do not leave Topcem dry-mixed with aggregates, immediately add the correct quantity of water to the mix.
Do not mix Topcem just with fine sand, use aggregates graded from 0 to 8 mm (for screeds up to 5-6 cm thick).
Do not mix Topcem with an excessive quantity of water.
Do not add water and remix Topcem after it has started to set.
Product Details:
Minimum Order Quantity | 50 Kg |
Model Number | Keralastic T |
Packaging Type | Bucket |
Form | Powder |
Open Time | 50 min |
Density | 1.56 g/cm3 |
Dry Solid Content | 100% |
Density of Mix | 1520 kg/m3 |
Adjustment Time | 90 min |
Brand Name | Mapei |
Classification In Compliance With EN 12004: Keralastic is an improved (2) reaction adhesive (R) classied as class R2.KeralasticT is an improved (2) reaction adhesive (R) and slip resistant (T) classied as R2T.Conformity of Keralastic and Keralastic T is declared in ITT certicates n° 25040320/Gi (TUM) and n° 25040471/Gi (TUM)respectively, issued by the Technische Universität München laboratory (Germany).
Where to Use: Indoor and outdoor, bonding of wall and oor ceramic tiles, stone material mosaics, etc. on:· screeds, renders, concrete, asphalt, wood, metal, PVC, reinforced polyester, bre-cement, gypsum, gypsum board,gypsum panels, etc.
Some application examples:
Bonding ceramic tiles, stone material and all types of mosaics in showers and on sheets used for prefabricatedbathrooms.
Bonding ceramic tiles and mosaics on wooden work surfaces or in kitchens in order to achieve a waterproof substrate.
Bonding ceramic tiles, stone material and mosaics on balconies, external terraces, domes or at roofs subject to foottrafc.
Bonding natural stones and reconstructed stone (marble of every type, slate, etc.) also subject to movement and sizevariation due to the absorption of water (class C of size stability according to MAPEI standards).
Bonding ceramic tiles and stone material on surfaces subject to vibrations and deflections.
Technical Characterisitics: Keralastic and Keralastic T are two-component, solvent and water free adhesives which are exible and waterproof. Theyare made up of a polyurethane base (component A) and a special hardener (component B).
On mixing the two components together, the result is a paste with the following properties:
Good workability
Excellent durability and resistant to ageing
Perfect adhesion to all surfaces used in building
Hardens by chemical reaction without shrinkage (until it becomes highly resistant)
High deformability
In the case of Keralastic T, highly thixotropic: it can be applied vertically without slump and without letting even heavy orlarge tiles slip. The slipping strength is in compliance with EN 1308
Product Details:
Minimum Order Quantity | 100 Bag |
Model Number | Adesilex P9 |
Packaging Type | Bag |
Form | Powder |
Color | Grey |
Open Time | 30 min |
Bulk Density | 1300 kg/m3 +-(100) |
Dry Solid Content | 100% |
Density to Mix | 1500 kg/m3 +-(100) |
pH of Mix | 13 |
Pot Life | Over 8 hrs |
Adjustability Time | Approx 45 min |
Pack Size | 25 kg |
Brand Name | Mapei |
High Peformance Cementitious Adhesive with no vertical slip and extended open time for ceramic, vitrified tiles and natural stone materials.
Where to Use: Interior and exterior bonding of ceramic tile, vitrified tiles,stone, and mosaics on floors, walls and ceilings. Also suitable for spot bonding of insulating materials sich as expanded polystyrene,rock and glass wool, Eraclit(Wood cement panels),sound-deadening panels, etc.
Some application examples:
Bonding ceramic tiles,vitrified tiles,stone and mosaics on the following substrates:
Conventional renders or cementitious mortar walls.
Interior aerated concrete block walls
Gypsum or anhydrite after having first applied Primer G
Gypsum board
Underfloor heating installation
Cementitious screed as long as they are sufficiently cured and dry
Interior painted walls as ling as the paint is firmly anchored
Tile on tile of existing flooring with tiles upto 900cm2
Bonding small sized tiles in swimming pools and basins
Technical Characteristics: Adesilex P9 is grey powder composed of cement,fine aggregates, synthetic resins and special additives developed in the Mapei Research and Development Laboratories.
A mortar with the following properties is obtained when mixed with water:
Easily workable
Highly thixotropic, Adesilex P9 can be applied on a vertical surface without sagging or slipping even when heavy tiles are used
Perfect adherence to all materials normammy used in building
Hardens with minimal shrinkage
Extended open time
Product Details:
Minimum Order Quantity | 100 Kg |
Model Number | Keraproxy |
Packaging Type | Bucket |
Form | Powder |
Open Time | 60 min |
Density | 1.8 g/cm3 |
Dry Solid Content | 100% |
Density of Mix | 1490 g/cm3 |
Pot Life | 45 min |
Adjustment Time | 130 min |
Brand Name | Mapei |
Technical Characteristics:
Kerapoxy Adhesive is a two-component, epoxy resin-based, high strength mortar with silica sand and special admixtures, according to a formula developed in MAPEI’s own research laboratories. When the two components are mixed together, a thixotropic mix is obtained which can be easily applied, even on vertical surfaces, at a thickness of up to 1 cm in one single coat.
Where to Use: Internal and external bonding of ceramic, porcelain and stone to floors and walls, on all substrates normally used in the building industry.
Some application examples: Bonding of all types and forms of ceramic tiles.Rigid bonding of bullnose and special ceramic tile shapes.Bonding tiles in fibreglass swimming pools.Bonding marble doorsteps and windowsills
Technical Characterisitics: Kerapoxy Adhesive is a two-component, epoxy resin-based, high strength mortar with silica sand and special admixtures, according to a formula developed in MAPEI’s own research laboratories.When the two components are mixed together, a thixotropic mix is obtained which can be easily applied, even on vertical surfaces, at a thickness of up to 1 cm in one single coat.
Kerapoxy Adhesive has the following characteristics:
Excellent durability and resistance to ageing
Perfect bonding on all types of substrate commonly used in the building industry
Hardens by chemical reaction with no shrinkage, becoming extremely strong
Recommendations:
Do not add water or solvents to Kerapoxy Adhesiveto increase workability.
Use the product at temperatures between +10°C and +30°C.
The packages are pre-dosed and, therefore, it is not possible to make mixing ratio errors. Do not estimate the quantities when mixing the two components: hardening will be compromised if the catalysing ratio is wrong.
If residues of the product remain attached to the tiles, use water for cleaning while the residue is still fresh. Use Pulicol 2000 if the product is hard, or remove mechanically.
Kerapoxy Adhesive must not be used for sealing flexible joints or those which are subject to movement (use Mapesil AC or Mapeflex PU21).
Product Details:
Minimum Order Quantity | 100 Bag |
Packaging Size | 20 Kg |
Model Number | Kerabond Plus |
Packaging Type | Bag |
Form | Powder |
Color | Grey |
Open Time | 30 min |
Bulk Density | 1300 kg/m3 |
Dry Solid Content | 100% |
Density of Mix | 1450 kg/m3 |
pH | 13 |
Adjustability Time | Approx 60 min |
Brand Name | Mapei |
Cementitious Adhesive for Ceramic Tiles:
Improved Adhesion
Extended open Time
Kerabond Plus is a high performance cementitious adhesive of Type 2.
Where To Use: Bonding all types of ceramic tiles (porcelain, single-red, terracotta, double-red, klinker, etc.) vitried tiles, natural stoneand mosaics on internal walls and oors, and external oors. Also suitable for spot bonding insulating materials such asfoam polystyrene, foam polyurethane, rock wool, glass wool, soundproong panels, etc.
Some application examples: Bonding ceramic tiles, vitried tiles, stone (if stable in damp environments) and mosaics on the following types of substrate:
Walls with natural nish render or cementitious mortar
Internal cellular cement block walls
Gypsum and anhydrite primed with Primer G or Eco Prim T Plus
Plasterboard
Heated floors
Well cured, dry cementitious screeds and screeds made from special binders (such as Topcem )
Technical Characterisitics: Kerabond Plus is a grey or white-coloured powder made from cement, selected graded sand, synthetic resin and specialadditives according to a formula developed in the MAPEI research laboratories.
When mixed with water, it forms mortar with the following characteristics:
Good workability
Perfect adhesion to all materials normally used in the building industry
Hardens with very little shrinkage
Product Details:
Minimum Order Quantity | 100 Bag |
Packaging Size | 20 Kg |
Model Number | Kerabond Plus |
Packaging Type | Bag |
Form | Powder |
Color | White |
Bulk Density | 1300 kg/m3 |
Dry Solid Content | 100% |
Density of Mix | 1450 kg/m3 |
pH | 13 |
Adjustability Time | Approx 60 min |
Brand Name | Mapei |
Cementitious Adhesive for Ceramic Tiles:
Improved Adhesion
Extended open Time
Kerabond Plus is a high performance cementitious adhesive of Type 2.
Where To Use: Bonding all types of ceramic tiles (porcelain, single-red, terracotta, double-red, klinker, etc.) vitried tiles, natural stoneand mosaics on internal walls and oors, and external oors. Also suitable for spot bonding insulating materials such asfoam polystyrene, foam polyurethane, rock wool, glass wool, soundproong panels, etc.
Some application examples: Bonding ceramic tiles, vitried tiles, stone (if stable in damp environments) and mosaics on the following types of substrate:
Walls with natural nish render or cementitious mortar
Internal cellular cement block walls
Gypsum and anhydrite primed with Primer G or Eco Prim T Plus
Plasterboard
Heated floors
Well cured, dry cementitious screeds and screeds made from special binders (such as Topcem )
Technical Characterisitics: Kerabond Plus is a grey or white-coloured powder made from cement, selected graded sand, synthetic resin and specialadditives according to a formula developed in the MAPEI research laboratories.
When mixed with water, it forms mortar with the following characteristics:
Good workability
Perfect adhesion to all materials normally used in the building industry
Hardens with very little shrinkage
Product Details:
Minimum Order Quantity | 100 Piece |
Model Number | Mapelastic Smart |
Packaging Type | Can |
Form | Powder |
Color | Grey |
Bulk Density | 1.4 g/cm3 |
Dry Solid Content | 100% |
Density of Mix | 1600 kg/cm3 |
Pot Life | 1 hr |
Brand Name | Mapei |
Pack Size | 10 kg |
Where To Use: Mapelastic Smart is used for waterproong hydraulic projects such as channels, faces of dams, swimming pools, basins,storage tanks, etc. and balconies and terraces.Particularly suitable for waterproong irregular surfaces.
Mapelastic Smart is also used to protect concrete structures, renders with hairline cracks and cementitious surfaces ingeneral which, being subject to vibrations, may suffer from cracking.
Some application examples:
Waterproong hydraulic channels, faces of dams and basins.
Waterproong bathrooms, showers, balconies, terraces, swimming pools etc. before laying ceramic tiles.
Waterproong plasterboard, render or cementitious surfaces, lightweight cement blocks and marine-grade plywood.
Flexible protection layer of new concrete structures or repaired structures subject to minor deformation under load.
Protection of cementitious renders or concrete with cracks due to shrinkage, minor movement caused by thermalgradients or dynamic stresses due to the passage of vehicles, against inltration of water and aggressive elements fromthe atmosphere.
Protection of concrete pillars and beams and road and railway viaducts repaired with products from the Mapegrout orPlanitop ranges against the penetration of carbon dioxide.
Protection of structures with an inadequate layer of concrete over the reinforcement rods against the penetration ofaggressive elements.
Protection of concrete surfaces which may come into contact with sea water, de-icing salts, such as sodium or calciumchloride, and sulphates
Advantages:
High performance: a 2 mm thick lm can cover cracks up to 2 mm wide.
Excellent mechanical characteristics thanks to the use of Mapetex Sel N reinforcement.
CE-certied product in compliance with EN 1504-2 and EN 14891.
Excellent elongation at failure (120%).
Fluid consistency for easy application
Resistant to UV rays.
May also be applied on existing coverings.
Compatible with ceramic, mosaic and natural stone coverings.
Product certied EC1 Plus by the GEV Institute (Gemeinschaft Emissions-kontrollierte Verlegewerkstoffe, e.V.) as aproduct with very low emission of volatile organic compounds
Product Details:
Minimum Order Quantity | 100 Kg |
Packaging Size | 30 Kg |
Model Number | Keraproxy design |
Packaging Type | Bucket |
Form | Creamy Paste |
Open Time | 40 min |
Density | 1.67 g/cm3 |
Density to Mix | 1500 kg/m3 |
Pot Life | 45 min |
Adjustment Time | 60 min |
Brand Name | Mapei |
Two-component, versatile, decorative, acid-resistant epoxy grout, with a bacteriostatic agent and BioBlock technology, easy to apply and clean, ideal for grouting ceramic tiles, glass mosaics and stone materials, to be used also in combination with MapeGlitter and Mapecolor Metallic. For grouting joints from 1 to 15 mm wide. Can also be used as an adhesive.
Where to Use: Decorative grouting of internal and external tiled floors and walls. Also suitable for an acid-resistant bond to all substrates normally used in the building industry.
Kerapoxy Easy Design allows to create floors, walls, worktops etc. in compliance with the HACCP system and the requirements of EC Regulation No. 852/2004 on the hygiene of foodstuffs.
Some application examples: •
Installing and grouting decorative coverings in environments with an high aesthetic value (e.g. showrooms, commercial environments, etc.).
Installing and grouting floors and walls in showers and bathrooms. Suitable on fibreglass and PVC substrates.
Installing and grouting floors and walls in thermal facilities, Turkish baths, etc.
Installing and grouting swimming pools.
Repairing existing degraded grouts by removing all loose areas and to a minimum uniform depth of 3 mm
Technical Characteristics: erapoxy Easy Design is a two-component, epoxy resin-based decorative grout, with glass micro-spheres and other special components. It has an excellent resistance to acids, easy workability and is very easy to clean. Kerapoxy Easy Design has a bacteriostatic agent, preventing from the proliferation of bacteria and the formation of mould on the surfaces of grouts, making tiled surfaces hygienic and safe, thanks to the innovative BioBlock technology developed as a result of MAPEI research.
This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 Plus by GEV when used for grouting.
Kerapoxy Easy Design may be mixed with up to 6 % by weight of MapeGlitter, metallised coloured glitter, to create aesthetic effects. Percentage depends on the aesthetic effect and workability desired. MapeGlitter is available in silver and gold.
Kerapoxy Easy Design may be mixed with Mapecolor Metallic, available in pre-dosed sachets (90 g, equal to 3% by weight of a 3 kg drum of Kerapoxy Easy Design), powder pigment based on very high-quality pearlescent mica, to create a metallic effect. Mapecolor Metallicis available in Moonlight (similar to platinum), Sahara (similar to gold), Shining (similar to silver), Red clay (similar to copper), Stardust (similar to dark silver). In order to obtain a homogeneous mix, we suggest to add Mapecolor Metallic of the desired colour to Kerapoxy Easy Design 700 (translucent).
Mixing Mapecolor Metallic with Kerapoxy Easy Designof other colours may result in numerous metallic effects with different intensity and shades. It is recommended to carry out preliminary tests since the result may vary based on the colours and quantities used, however within the maximum dosage of 3% by weight so that the workability of the grout/mortar is not affected.
Product Details:
Usage/Application | Industrial |
Packaging Size | 50 kg |
Type | Water Based |
Categories | Epoxy |
Form | Powder |
Shelf Life | 12 Month |
Ph Value | 6 |
Material | Cement |
With our vast industrial experience, we are engaged in offering wide array of Cement Based Adhesive. Our product is highly demanded in the market for their high grade quality. The offered Cement Based Adhesive is used in building, construction and many more purposes. Moreover, we offer product at industry leading prices.
Product Details:
Minimum Order Quantity | 100 Kg |
Packaging Size | 25 Kg |
Pack Type | Bag |
Form | Powder |
Grade Standard | Industrial |
Surface of Application | Tile |
Country of Origin | Made in India |
Type | Polymer Based |
We offer Polymer Based Tile Adhesive.